Rock Products Logo
Now Incorporating Aggregates Manager
 

 

 
 

Top Three Safety Implications of Replicator Spare Parts


Weir Minerals believes safety is always its highest priority. Risk is inherent in the mining industry, where heavy duty machinery is pushed to its limit, but “we strive to eliminate potential risks at every step of our equipment’s lifespan to ensure everyone returns home safely to their significant others at the end of each day,” the company said. “Non-OEM slurry pump spare parts undermine the safety of our equipment. Lacking the reliable wear-resistant alloys we design into our pumps and our full design documentation, replicators’ parts inherently introduce risks to the operation of the OEM pumps they’re installed in.”

Additionally, the manufacturers of replicator parts often reduce costs by bypassing key safety steps in their manufacture, inspection and transportation, introducing a variety of entirely preventable risks to a mine and its employees.

Below are just three ways mines have encountered serious risks by using non-OEM pump components.

Inferior quality components can fail catastrophically. Warman slurry pumps are designed, manufactured and installed to operate under demanding conditions that place every component in the pump under a significant amount of stress. Ensuring components meet such a challenge is an enormous task, requiring the highest quality construction materials, lengthy and precise design processes, stringent quality control in manufacturing and extensive safety testing.

Without also replicating this hard work and due diligence, non-genuine spare parts simply can’t be relied upon to safely operate under the pressures required when pumping mining slurries.

Without wear-resistant alloys, such as Ultrachrome A05, replicator parts will not only achieve vastly inferior wear life, but they’ll wear unpredictably in a way the pump wasn’t designed to handle. This can damage other parts of the equipment and introduces risks for maintenance engineers who need to deal with unforeseen problems.

Without understanding the complex design processes of components, replicator manufacturers use 3D scanning to approximate their construction. While this gets the broad shape of a component right, it often fails to account for smaller features essential to its safe operation and leads to a poor fitment within the pump. Even tiny gap or interference between components can lead to leakage, vibration or excessive stress concentration which causes dangerous and unpredictable cracks in components.

Without state-of-the-art facilities and extensive, verifiable quality control processes, the same manufacturing faults are seen time and time again in replicator spare parts. Voids, cracks and other structural flaws in casting are often difficult to detect prior to installation, especially without an experienced engineer on site to support it.

However they arise, weaknesses such as voids, cracks and sub-standard materials pose a serious risk in the challenging environment of a high-performance slurry pump. High pressures, hot abrasive or corrosive slurries and large, rapidly rotating components can turn a “small” weakness into a catastrophic component failure.

Failure of critical components can lead to high pressure slurry spray, which is often toxic, corrosive or heated to very high temperatures. It can also cause high-energy brittle fracture projectiles which can travel quite far. The risk of hitting other equipment or personnel is high in such situations.

To operate safely, rugged equipment needs safe and reliable components to be properly fitted, which replicator spares often aren’t.

Replicator parts aren’t compatible with Warman lifting tools. Larger equipment, such as the Warman MCR 760 pump, have parts that can weigh up to 2,000 kg – leaving little room for error when maneuvering them in the tight confines of a plant. Any accident or equipment failure during a part’s transport poses an acute risk to equipment and personnel.

Warman lifting tools and lifting methods are painstakingly designed and exhaustively tested to meet these challenges and cater to the different needs of each component in a pump.

One tool design concept utilizes a fixed locking jaw mechanism, which dramatically reduces the possibility of the component becoming detached. Another has a beam that allows combinations of components to be lifted while still attached to each other.

While these features enhance safety for users lifting Warman genuine spare parts, they also mean that even slight design deviations in a replicator part introduce an unacceptable risk of that part slipping out from the tool unexpectedly.

Working with worn parts introduces additional risks, including dangerous sharp edges and the potential of fractures under the stress of transport.

All Warman lifting tools are designed to minimize stress on the equipment being lifted, which is vital as worn components will have different stress profiles to new components.

However, Warman lifting tools aren’t designed to meet the stress profiles of replicator components – which are often significantly weaker due to inferior alloys used in construction, or because key parts of the structure have been thinned or removed to reduce costs.

Simply put, lifting replicated parts with Warman lifting tools is unsafe. Non-genuine spares should only be lifted with tools supplied by the replicator.

Sub-standard transport equipment creates unloading risk. Unfortunately, there’s a lot that can go wrong before equipment even gets to the mine – so safety must begin at the factory. Before any Warman pumps or components are dispatched, a full risk assessment is conducted – identifying and addressing potential issues in loading, transportation and unloading.

Warman pumps are secured with a custom-built cradle for lifting and transportation, tightly tied down to prevent movement during the trip and providing protection to equipment and personnel under poor road conditions, heavy braking, and while unloading.

One method replicators use to reduce costs is to work under the assumption that nothing that can go wrong, will go wrong. Parts are frequently shipped on generic transport pallets which can’t handle the component’s weight, and break or move about mid-journey. This adds risk of component damage and personnel injury during transportation and at the point of unloading, when a broken pallet or inadequate tie-down chains could lead to an unstable load and toppling hazard.

This can be avoided by making small upfront investments in genuine Warman spares.

Between their lack of design scrutiny and inferior construction processes, quality control, materials, transport controls and lifting tools, non-OEM components introduce serious risks to equipment and personnel. Risks like that are hard to justify.

Information for this article courtesy of Weir Minerals.