Rock Products Logo
 

 

 
 


Cemex’s Balcones Quarry – The Largest Crushed-Stone Plant In The United States By Volume – is a Stone-Producing Juggernaut.
IMAGE

Buckley Powder handles drilling and blasting and they blast three to four times per week.
IMAGE

Conveyors criss-cross the plant moving stone to the secondary crushing and screening operations.
IMAGE

The plant is highly automated and production points are monitored by camera.

This is the second in a three-part series on Cemex’s Balcones Quarry in New Braunfels, Texas. Last month’s article focused on the company’s 50th anniversary. – Ed.

Cemex recently marked the 50th anniversary of its Balcones Quarry in New Braunfels, Texas. In those 50 years, the quarry has grown and prospered. The United States Geological Survey currently ranks the operation as the top crushed stone producer in the nation in terms of volume. 

It is said that everything is bigger in Texas, and the vast 2,800-acre quarry site is no exception. The quarry has an additional approximately 50 years of reserves, and will continue to be a key resource supporting development throughout the state of Texas for many years to come. More than 100 people work at the operation.

Equipment is the Key

To produce the huge volume of stone that goes out the gates, exceptional equipment and technology is a must. Balcones Quarry uses some of the best, starting with its drilling and blasting operation.

Drilling and blasting is the critical first step in the production process for any quarry. While some operations are working one or two quarry faces, Balcones works 12.

“We contract it out at Balcones Quarry,” said Lance Griffin, Cemex USA’s director of aggregates – Texas and New Mexico Region. “Buckley Powder handles that for us, and we blast three to four times per week.“

Over the years the quarry has had to adapt its drilling and blasting practices. “Yes, we have changed as technology has evolved, employing the latest tools and technologies to make it less intrusive to our neighbors,” Griffin said.

Loading and Hauling

Working at those 12 quarry faces is an impressive array of heavy iron. Reliable equipment is important at this stage of the operation, given the 1.5- to 2-mile cycle between the face and the primary. The company is a dedicated Caterpillar customer.

“We use three loaders – Cat 992 and Cat 993K models, as well as eight haul trucks, which are Cat 777D, F and G models,” Griffin said. “Cat not only works well in production efficiency but Holt Caterpillar service is second to none. We utilize the Cat Job Site Solutions System to manage the flow of equipment on-site, maximizing efficiency throughout the quarry.”

Griffin said he cannot emphasize enough the importance of a strong dealer relationship. “Holt is a true, strategic partner of the Cemex Balcones Quarry,” he said.

And Caterpillar equipment is also used in other areas around the quarry. “We use a Cat D9 Dozer, 18M Motor Grader, Cat 773 water truck, and 980K, 982M, 988K, 992 and 993K loaders,” Griffin said.

Crushing and Breaking

From the quarry face, material is trucked to the primary crusher, a Hazemag impactor. The heavy-duty crusher has a capacity of approximately 2,500 to 3,000 tph.

“We also use a secondary breaker, a Cat 349 with a Cat hammer, as needed,” Griffin said.

From the primary, the stone is moved to a secondary crusher, which is also a Hazemag impactor. The secondary crusher breaks the stone down to 4.5 in. From there, the secondary crushed stone is conveyed to the fractionated wash plant for cleaning and sizing. Loading happens into either rail cars or trucks.

Our tertiary crushers are manufactured by Sandvik,” Griffin said.

Screening and Sizing

All screens in the plant are supplied by Deister. “We generally dry-screen base stone products at the primary and secondary crushers as well as a 3 x 5-ft. product,” Griffin said. “At the wash plant, we wash and size on both three- and four-deck screens. The screen media is either Tema, Polydeck or Flex Mat.

“We utilize both Schurco and GIW pumps to handle all the slurry pumping,” Griffin added. “The MCC at the wash plant utilizes Square D and Toshiba components. Sandvik 660 crushers operate in the fully automated wash plant.”

IMAGE

Haul trucks dump into the Hazemag primary crusher.
IMAGE

Caterpillar loaders and haul trucks work the muckpile after a blast.

Dry screening is accomplished on either two- and three-deck Deister screens. The wet screening and washing is done on Deister three- and four-deck screens.

Balcones Quarry makes upwards of 15 different products, both dry screened and washed.

One of the highlights of the Balcones operation is its wash plant, which will be covered in detail in next month’s issue of Rock Products.

The new, fully-automated water recycling system uses and recycles 12,000 gal.-per-min. of water to separate aggregate sand fines, which are then reclaimed from the water stream as useable sand product. The water recycling system decreases the need for additional local water and adds efficiency to wash plant operations.

“Our wash plant water at Balcones is supplied from our water recycling and sand plant,” Griffin said. “The water recycling and sand plant utilizes Schurco Pumps, Abresist and Krebs Cyslones, McLanahan twin 42-in. screws and both an Azfab thickener and McLanahan thickener. The recycling plant is fully automated and connected via fiber optic to the main Balcones plant automation system.”

The plant automation system is expansive. A tower adjacent to the primary crusher is the center of control for the plant.

Conveying and Material Handling

The conveying and material handling aspect of the plant has evolved over many years.

“Our stackers are Mesaba and Thor,” Griffin said. “Other manufacturers have constructed conveyors in the past. RMS Engineering designed all the wash plant conveyors, and the wash plant utilizes Van der Graaf (VDG) motorized pulleys.”

The VDG motorized pulleys have helped the wash plant keep its electrical efficiency up, due to the lack of drive belts and transmission losses,” Griffin said. “They’ve also made safety simpler because less guarding is needed.”

Stockpiling and Loadout

Cemex materials are shipped by both truck and rail. “We ship a unit train to our Houston terminals almost every day and run high-truck volume to the booming South Central Texas Market,” Griffin said. “Along with supplying the aggregate market, the Balcones Quarry also supplies the neighboring Cemex Balcones Cement Plant with its raw material.”

In keeping with the strategy of employing the latest technology to benefit plant operations, Balcones Quarry is using drones for stockpile measurements to keep track of inventory.”

“The drones are used in mine planning and surveying, as well as inventory,” Griffin said.

Balcones Quarry is a shining example of what an operation can be when it is fully integrated into a community. It not only supports the region with high-quality aggregates, but exemplifies what Cemex strives to do in every community in which it operates.

Next month, in the third part of this three-part feature, read about how Balcones Quarry uses a state-of-the-art water-recycling system to decrease the company’s environmental impact and reliance on water pulled from nearby sources.


IMAGE

More than 100 people work at Cemex’s Balcones plant.